RXP2002 / RXU2600
- The RXU2000 and RXU2600 are each available in two versions, with either a rather squared or an elongated table
- With the optional temperature control of the machining area, high-precision machining of even very large workpieces can be achieved, particularly when using temperature-controlled grinding oil
- Ideally suited for the production of large progressive dies
- Crane loading is possible from both sides
- Largest spindle with HSK A63 interface, 102 Nm (S1)
| Technical data | RXU2000 | |
|---|---|---|
| Machining range | 2000 mm x 1800 mm x 800 mm | 2400 mm x 1400 mm x 800 mm |
| Table size | 2000 mm x 1750 mm, T‑slots 22 mm, distance 170 mm | 2300 mm x 1750 mm, T‑slots 22 mm, distance 170 mm |
| Max. distance between spindle nose and T‑slot table | 1000 mm | 950 mm |
| Workpiece weight | max. 5,000 kg | max. 5,000 kg |
| Feed | 0–60,000 mm/min | 0–60,000 mm/min |
| Milling spindle (standard) | 24,000 rpm, 67 Nm (S1), HSK A63, max. tool diameter 35 mm, others on request | |
| Tool changer | 86, optional more places (chain changer – can be loaded during machining) | |
| Measuring laser | Placed aside the table with chip protection | Placed aside the table with chip protection |
| Chip disposal | With 2 screws into chip conveyor | |
| Machine weight | ~49.0 t | ~49.0 t |
| Required space | W 5510 mm x L 6500 mm (depending on configuration) x H 4350 mm | W 5510 mm x L 6500 mm (depending on configuration) x H 4350 mm |
| Technical data | RXU2600 | |
|---|---|---|
| Machining range | 2600 mm x 1800 mm x 800 mm | 3000 mm x 1400 mm x 800 mm |
| Table size | 2600 mm x 1750 mm, T‑slots 22 mm, distance 170 mm | 2900 mm x 1750 mm, T‑slots 22 mm, distance 170 mm |
| Max. distance between spindle nose and T‑slot table | 1000 mm | 950 mm |
| Workpiece weight | max. 6,000 kg | max. 6,000 kg |
| Feed | 0–60,000 mm/min | 0–60,000 mm/min |
| Milling spindle (standard) | 24,000 rpm, 67 Nm (S1), HSK A63, max. tool diameter 35 mm, others on request | |
| Tool changer | 86, optional more places (chain changer – can be loaded during machining) | |
| Measuring laser | Placed aside the table with chip protection | Placed aside the table with chip protection |
| Chip disposal | With 2 screws into chip conveyor | |
| Machine weight | ~550 t | ~55.0 t |
| Required space | W 5510 mm x L 7965 mm (depending on configuration) x H 4350 mm | W 5510 mm x L 7965 mm (depending on configuration) x H 4350 mm |